91000 MIXER MINCER
The key point of difference apart from improvements in our
gear motor drive technology is the feedscrew and cutting
system enlargement.
The feedscrew diameter is increased to 170mm and on the
HECS system this clears out to 250mm mince through an
11 inch 280mm, or 14 inch 355mm diameter plate or Unger
280mm double cut system.
The 9000 series range of mixer grinders are in line grinders
whereby the feedscrew runs parallel with the mixing paddles
or right mixer grinders with the feedscrew running at right
angles to the paddles similar to the 5000 series.
There is no transfer screw feeding into a 2nd mincing
feedscrew like the 6000 series.
This short 170mm diameter feedscrew provides much higher
production output rates and with a High Efficiency Cutting
System (HECS) addition the ultimate grinding system.
9000 MIXER GRINDERS have been in operation since 2013
with the most recent developments of the 92500 Right Angle
Mixer Grinder (2500 kg batch capacity) and 91000 Straight
Mixer Grinder.
Beyond Spectacular Production output capacity is the 9000
series Mixer Mincer/Grinder Drive Train has undergone
significant engineering upgrades.
91000 MIXER MINCER
9000 SERIES
HECS High Efficiency Cutting System Increasing from the
previous 8 5/8” 220mm diameter Cutting System to:
• 11 inch Enterprise 280mm Diameter Plate.
• 14 inch Enterprise 355mm Diameter Plate.
• 280mm Diameter Unger Double or Triple Cut Mincing/
Grinding System.
The 9000 series Mixer Grinders are available in both Right
Angle Feedscrew Design & In Line Feedscrew Design.
• In line Mixer Grinders Short Feedscrew operates parallel
with the mixing paddles.
• Right Angle Mixer Grinders Short Feedscrew operates at
right angles to the paddles.
No transfer screw feeding into a Mincing/Grinding Feedscrew
providing full flow production performance.
The short 170mm standard diameter feedscrew high
production output rates.
HECS 11 inch 280mm or 14 inch 355mm diameter Cutting
Systems achieve the ultimate grinding system.
