Ekomex WW-130 Grinder

POA

Need more information?

Open a relevent enquiry ticket and our friendly team will be happy to assist.

Enquire Servicing

PLC CONTROL

 FOR FRESH & SEMI FROZEN PRODUCT

 Description:

  • Appropriate construction of the hopper, housing, angular positioning of the screws
  • Throat with a cover at a height that allows discharge to a standard 200 l trolley or big box containers after legs extension
  • Properly selected drives of the working and feeding screw
  • Access to the discharge of the feeding screw and easy cleaning of the hopper through the side cover opened on the arm, secured with a limit switch
  • Good flow good compression of the raw material in the cutting tool
  • Proper structure of the cut
  • Manual ejector of the main screw
  • External connection for rinsing the main worm sealing hygiene zone
  • Multi-stage shaft sealing – Drives separated by a hygiene zone with a sealing unit
  • Easily accessible zones for cleaning
  • Machine covers with hygienic seals and locks
  • Central greasing station
  • PLC control with Touch Panel – Operator panel with hermetic, hygienic, accessible, high-quality buttons
  • Control cabinet built-in stainless steel (standard 5 m connecting cable)
  • Limit switches for the front guard, grating or upper frame and platform
  • Emergency Stop

 

Technical data:

  • Volume of the mincer hopper 350 dm³ (Max. product filling up to 70 ÷ 80 % (weight 200 ÷ 250 kg – calculated for fresh meat)
  • Diameter of cutting tools 130 mm (system E130)
  • Capacity 1000 to 5000 kg / h – depending on the type of product, temperature, cutting set, hole plate diameter (estimated for fresh meat 5 mm hole plate 1 – 3 t/h)
  • Power of the main engine (NORD motor reducer) 11 / 17 kW (2 gear motor)
  • Drive of the feeding screw from a NORD 3,1 kW with Inverter
  • Standard supply voltage 400V, 50 Hz, 3 P. (quotation for other voltages available on request)
  • Unloading discharge height for standard 200 l trolleys (DIN9797) – other heights to be agreed
  • Configuration of cutting set 3 ÷ 5 piece
  • The extent of grinding on the end hole plate 3 ÷ 35 mm

Additional equipment:

* SINGRISET separating head (more information in the S2000 model description)

* Column loading device for 200 l trolleys. It improves ergonomics and ensures continuity of work.

* VERTICUT system – horizontal knife shaft for initial grinding of frozen blocks to -10 ° C, installed in the hopper.

* VERTIMIX system – horizontal paddle or Z-type mixing shaft – placed above the feeding screw, which works in reverse mode during premix cycle

*Mobile Trolley for Cutting Tools

*Hopper extension to 500L

Units 1-6 Mountain Farm, Marsh Road, Hamstreet, Ashford, Kent, TN26 2JD. | Registered No: 05766547, Registered in England.

EORI No’s: GB621813661000 XI EORI number (Ireland) XI621813661000s